| Other combinations or special applications are available. Please email leave feedback with your needs. |
| Application | Part# | Configuration | Prices Include Shipping* | |
| Universal Cone. | CNS | One Cone | $25 Shipping Included* | |
| Honda ST1300 rear non-drive side cone. | CN3 | One Cone | $25 Shipping Included* | |
| Honda VFR rear drive side cone. | CNV | One Cone | $25 Shipping Included* | |
| BMW single sided swingarm rear drive side cone. | CNB | One Cone | $25 Shipping Included* | |
| BMW R12GS/RT/S/R, K12R/S/GT 62mm rear wheel adapter as an upgrade to an existing UNIV balancer. | BA12 | One Adapter | $35 Shipping Included* | |
| BMW R12GS/RT/S/R, K12R/S/GT 62mm rear wheel adapter as an upgrade to an existing BML balancer. | BA13 | One Adapter and one CNS Universal cone. | $45 Shipping Included* | |
| BMW Adapters for 1984 and older BMWs with 17mm ID tapered roller bearings. | BA17 | Two Adapters | $25 Shipping Included* | |
| BMW Adapters for 1984 and older BMWs with 20mm ID tapered roller bearings. | BA20 | Two Adapters | $25 Shipping Included* | |
| BMW F650CS single sided swingarm cones. | F650R | Two Cones | $50 Shipping Included* | |
| Triumph single sided swingarm rear cones. | TRIR | Two Cones | $50 Shipping Included* | |
| Aprilia Futura single sided swingarm rear cones. | APFC | Two Cones | $50 Shipping Included* | |
| Ducati single sided swingarm cones. Rear wheel drive side hub ID is 42mm. | DU42 | Two Cones for both front and rear wheels | $50 Shipping Included* | |
| Ducati single sided swingarm cones. Rear wheel drive side hub ID is 55mm. | DU55 | Two Cones for both front and rear wheels | $50 Shipping Included* | |
| MV Augusta single sided swingarm cones for rear wheel. | MVAC | Two Cones | $50 Shipping Included* | |
| Combination cone set for Ducati, Triumph and VFR single-sided rear wheels. | COMBI | Two Cones | $50 Shipping Included* | |
| Long Axle - 14" with machined ends. Only for original Parnes bearing blocks that require reduced axle ends. Important Info.. | LAX | Axle | $15 Shipping Included* | |
| Long Axle - 14" without machined ends. For latest Parnes bearing blocks that do not require reduced axle ends. Also works on traditional balance stands. Important Info.. | LAX.1 | Axle | $15 Shipping Included* | |